NEWS
NEWS CENTER
0574-63339632
13968246123
Current Location：Home >> NEWS
date：2016/5/27 20:19:36
In recent years, due to various reasons the mold industry, mold industry is facing many difficulties, are doing as good as before, especially the majority of migrant workers are the most profound experience, wages rise not up, rising prices reduced purchasing power, companies also compete intense downward price orders, wages and prices is up, the situation is really difficult and not ideal. Then the last ten years, more and more graduates mold industry, every year tens of thousands are rising faster, leading to saturation of talent, competitiveness increase, especially graduates, work is hard to find. And tired, and low wages, the key to the future development prospects are less clear, in the end a lot of people had to leave the industry. As in the mold industry struggled for ten years who die for the evolution of these years are struck by. Based on the location of the problem, naturally not complete a thorough study of these issues, after all, I was living in Shenzhen, do not see the whole picture is inevitable, then in this personal vision do some simple analysis, we hope to, in particular, just or will be engaged in the mold industry, new people to help. The case mentioned above, most of the newcomers are doubts, the mold industry is not the decline? Die there a future? In discussing this issue, first locating the lower mold throughout the manufacturing industry, the question naturally clear that the prospects. Die role in the manufacturing industry Mold is the mother of industry, and now the vast majority of products are produced by mold, only to die so that products reach mass production, improve efficiency and reduce costs. There are very few hand-hand version or advertised products they do not need or use less mold. Modern industrialized world has high speed, there is no way to leave the mold. That is, the mold is one of the industrial world's most important cornerstones of the industry is unlikely to be eliminated. Especially in the current era of rapid development of China's industrialization process, the mold industry is still a sunrise industry, is still full of opportunities for the industry! Then, the mold industry in recent years is how? Why many employers complain about not making money, mold practitioners also complained wages are not rising, and work hard to find? Why is this so? Mold industry development status Mold industry has led to the current impasse on several factors. The first is the market environment, from the 2008 financial crisis began, in fact, the crisis has not left, the first two years because the government's four trillion, or a little improvement, by 2012 the depression again. These factors lead to the manufacturing sector experienced difficulties, and mold industry as one of the core industries of manufacturing, will naturally be directly affected by the impact of reduced orders, lower profits, to people in the mold industry, the direct impact on income. Especially the Diaoyu Island incident in 2012, the Japanese mold industry mold factory all basically more or less affected. There on the whole pattern of the world, Europe and other countries continued economic downturn, but also directly affects our mold industry, because the whole mold industry profits relatively high mold basically export mold, mold exports less profit naturally less a. Boss earn money, not wages naturally rise up. This is the objective external factors. This factor is very difficult to want to change in the short term, it is basically impossible. As far as I recently read some newspapers, the site of the future economy of speculation, the future for a long time, European economies very difficult to sustain a vigorous return to the previous. Slowly improvement can be expected, it is very difficult to want to ask for the moon up. Fortunately, the domestic environment is necessary to contrast a much better long term stability enhancement is for sure. Domestic exports mold relative profits may not be as mold, in having the amount of ah. However, the mold industry is profiteering off his coat and therefore there is no way of things. After all, in addition to the monopoly of the industry, any industry can be no lasting profits, normal ups and downs. The development of anything is cyclical, and now only a temporary downturn, the overall trend of China's economy will not change, hence the result will certainly be difficult to eliminate gradually in the next period of time is not long, so, for this factor is actually nothing to worry about. Moreover, the economic downturn, even greater than the mold industry involvement, far more than the manufacturing sector, most industries will receive impacts. Because of the overall environment and the conclusion of a dying industry it is arbitrary, unless the industry is completely dead, or the potential of micro, otherwise they can not say so. After all, the mold industry is the basic industries. Die in the industry, just as the restaurant is to the livelihood of the people, it is absolutely essential. Mold industry subjective factors: First mold factory in recent years, since the earlier explosive mold industry profits attracted many practitioners in the mold industry has a certain amount of accumulation of technology, capital, after contacts have opened up their own businesses, from wage earners became boss. Thus, large and small machining shops, mold factory, shop supplies have evolved, the number of mold company is almost geometrically growing faster. From the point of view of personal development is of course a good thing, but the whole industry is concerned, the original company to do a live, higher profits, and now three companies rush in order to get orders, naturally the price war is inevitable. When you were 10, I was 8, I 8 5 to get you. It is in such a shopping, the mold industry has finally become a lucrative industry made a profit even in a low-profit industry. In a vigorous battle, different companies took a different path. Some companies insist on quality, not to engage in a price war in the customer support has been fixed, then there is plenty of cash flow, slowly expand from small, it has finally become a big company. However, some of these companies lack in quality and price of these two on the way to select a price war, forced to reduce costs in order to save on equipment, labor, resulting in a vicious cycle, quality is getting worse, more and more low unit price, and finally finally closed. Company closed, tend to produce a chain reaction that can lead to several companies do not receive payment, particularly larger companies, because the company's business dealings between companies usually monthly, normal procedure closed Fortunately, you can to recover part of the debt, and some simply sell a machine, to receive a payment - on foot. Also met a lot of such things. In a relatively difficult period in recent years, a large number of weak viability of small businesses or expand on track or close. Basically I can live up to now all have their own opportunities, which is the business of Ebb Tide, the survival of the fittest. Entrepreneurship is a good thing, the mold industry is also likely to join the venture attracted many people to join a characteristic of them. However, entrepreneurship is risky, a company's success is often built on the basis of more company closures on. Preferably after money, contacts, technology has a certain basis, especially after the start again with a stable customer better. Wanted to get up and then find customers shop stalls, often very difficult one is not careful, the capital chain broke it difficult to sustain. These are subjective factors inside the mold industry, the rapid expansion of the industry itself, even if the economy will thrive competition, not to mention the unfortunate experience of economic downturn, this difficulty arises. These are some of the recent status quo mold industry. Then we say that the future development is expected, I believe the majority of couples still more concerned about this one. Mold industry is expected to develop First, the external environment, this has to be considered. Economic recovery is only a matter of time. This is nothing to worry about, then naturally there will be a series of measures to stimulate the economy, the Chinese economy needs only around 8% per annum, manufacturing, mold industry have nothing to worry about. Although profits are no longer, as the door to entrepreneurship for the majority of ambitious people open. Just before the threshold is higher than some of it. Time should not be more than two years, because this time is the term of office of the bureau half, did not see the effect, or the most urgent national leaders Oh! Then the internal environment. Experienced brutal competition during the past few years very many poor management of business failures, the survivors have their natural Survival. Either have a stable of customers or business strength or excellent quality, wine uninvited guest, company management, technical strength have stabilized, such a company is considered through the run-in period, entered a stable period. But also it has a certain reputation. Such companies, once the external environment improvement, increase traffic, improve profits it is to be expected of. Then expand the appropriate according to their own traffic. Price will be much better than it is now bloody period, after all, is not the king blindly price war, this company will not survive for long. After eliminate some companies, the situation has changed enough to go around, there is no need to engage in a price war. Corporate profits improved, and was followed by improved wages. Especially senior technical personnel, such as: advanced mold design engineer, senior programmer, senior master mold, the posts of senior technicians, there will be a lot of demand, because a company in order to stabilize the development of such technology is essential in order to stabilize the staff, salaries will also have a certain rise. Rise two to three percent in the current basis or no problem. Mold type of problem In the past, China's mold industry, mainly processing low-end and mid-range of the mold. High-end small, and basically exports, however, as the culture of China's mold industry upgrading equipment, technical personnel mature, there are a large number of mold factory with a high-end manufacturing mold qualifications and strength, but also with a large number of companies to assembly of high-end products on the domestic demand for high-end mold more and more, so to a certain extent to get rid of dependence on foreign economic environment. I believe in the near future, China's GDP reached before the world, technical strength of our mold industry will advance to the world class level. After all, there is no first-class mold, we can not make first-class products to come. We mold industry, will be one of the two cornerstones of China's manufacturing industry to achieve this level of world-class core. (Another cornerstone is the development will be discussed in a subsequent article) and our people die, all this will be executor. Then there are low-grade mold, as wages, energy, rent, among other factors kept up (they do not meet the economic crisis, these upgrade will not stop), the future survival of the company has been doing low-grade mold will become increasingly difficult, meager profit enough to cope with the rise in expenditure. Later will be together with the low-end products, we began to economically underdeveloped regions, Southeast Asia and other energy, low labor cost areas transferred. Because, as has always been low-grade mold with low-grade products manufactured, the transfer of low-end products, as a core part of the manufacturing chain, naturally with the transfer, that's for sure. Made in China at that time, and eliminate or reduce the high energy consumption, high pollution and low-tech products made in China will no longer be synonymous with low-grade, low-cost, now a civilian. But rather, high-grade, quality upper (high in some areas), the forefront of fashion, the price is, and so on. This is certain, because a country is always engaged in the production of low-end, it is impossible to climb the peak. China's rising trend is irresistible, unstoppable transformation of the manufacturing sector also, we naturally mold industry is also true. Future detailed analysis of the development trend of the mold Future development of the mold there are so several directions: 1. High-precision Dimensional accuracy can achieve, it is to create high-quality high-precision, high-tech products of the most important factors. It is best done before Japan and Germany. With decades of continuous learning, innovation, China's mold industry we have emerged a large number of specialized in precision mold manufacturing company. Do high-precision molds, there are two main elements, a device is a talent. With the dramatic increase in the number of high-end equipment in China, and this has been no problem. Talent has also been a lot of them are out of business from foreign or joint enterprise or the boss or supervisor, to learn with technology to compete with the original from the old club. Currently the most sophisticated in the field with the foreign as well as certain distance, however, one can imagine such a distance as we catch up, but will surpass in the near future tied! This is only a matter of time. After all, the manufacturing sector is also reflected in a country's comprehensive national strength, especially in a big country big country, a deformity of the manufacturing sector is lagging behind, it is unstable. Especially so many of our most populous country. There is such a high-end manufacturing can be readily converted to wartime production of military supplies, is also an important part of a country's war potential, the state is impossible not seriously. 2. High efficiency That is highly automated. As with all kinds of mold production automation equipment (mainly mechanical hand) popularity, as well as intelligent mold internal standard lift (mainly hot runner), mold production efficiency is getting higher and higher, and it will move towards the higher, the better the realm of development. In this process, the mold design staff requirements will be higher, at that time, die design automation equipment can not just be understanding, but also to participate in the design of the job. Moreover, in the design process, the cycle will be increasingly high demands, which also requires quality mold design personnel also need to constantly upgrade the job. Meanwhile, in this process, the injection molding plant Pu union is a big blow. Because all mechanized complexes, do not need so many workers, and injection molding plant employees will be less and less, even as they are now developing to developed companies, a facility only a few people, then all machines, computers. That is, in the future development of highly mechanized, Pu term will likely disappear. After the factory, only three kinds of people: managers, technical people, robots. 3. The new die As technological innovation continues to progress, many of the original need very complicated and tortuous way to achieve the mold can become very simple. There are also a lot of original thought impossible structures possible. New opportunities and challenges which are mold industry, specifically, mold designers opportunities and challenges to master these new mold design and manufacturing technology mold factory will have more initiative. Need to master high-tech deep mold design and manufacturing heritage, these new mold profits will be a good return on investment for this company a lot of money, and these high-tech company has become a well-known resource play, for better customer chips! A few simple types of mold recent years emerged: four rotating the top of the mold, after the second injection products plastic products sliding fit mold, injection molding and stamping die integrated, high-speed continuous die (mold I was born, to die to understand much, I hope to have this knowledge friends urged January) and so on. Those who can breakthrough and innovation in these areas mold factory will therefore get more in return! The price war is always low-level behavior, compression everyone's living space, the end result is nothing more than just die. Cut-throat price war, war is better shopping technology, the quality of war, as long as the technology and quality of Superman, one chip, even if you price is higher, but also have a lot of customers flock to, this is called brand ah! Moreover, if companies are to take precedence technology and quality of the road, then lift the wages of high-tech talent is to be expected it! Mold, always rely on technology and quality of the industry to speak ah! 4. The integration of product development and mold This trend is inevitable, this change is the ratio of the line instead of the all-powerful master mold manufacturing more effect on an altered pattern. Simply put, mold design and product development is the integration into a new position, a product can be responsible for the entire organization from the appearance, to die, to die processing, mold manufacturing, product assembly post a new series of work. Become the absolute core manufacturing. 5. Summary Mold industry is still promising, because it is the two core manufacturing, particularly if after these two core integration began as a core time, but also a golden era is coming! Even now really depressed, really difficult, but not be able to deny the industry! Especially such a sector basis. , Adversity called into the room, now is the most difficult time, when it is most people quit, but it is a good time of entry, because it is in cyclical trough, so a few years, when the climax, just learn technical strength, revenue began to climb to the top of the time. Anyway, now we pay high up, the industry downturn apprentice on income but is minimal. How it will not fall below the minimum wage. Especially friends who just graduated from a good think clearly, think more about planning for the future now! For just join friends, there are a few suggestions: 1. Do not deny the technology industry, the technology industry is the need to accumulate time, do not take income and general workers joined the line technology sector jobs to do comparison, this makes no sense. The sooner not get high-wage job is a good job, a general workers begin to work overtime if likened to a few years to be higher skilled workers. But the future? Have a future? Here I do not think that reveal what the general work better than the technology industry, think about what this means, right, or the like time is right to see to know. 2. Not all technical positions have a good future, this must be a careful analysis of future development, which is destined to decline the post, to be phased out, which will become increasingly important posts, you can delve into a lifetime more and more popular to. We should carefully consider, not to the temporary success of Heroes, also can not be evaluated now wages a future post. Basically there is a law, high-tech, deep background, learning the hardest job basically is the most promising positions. Specifically, how their own good analysis of it! I also have some previous article relates, you can get a look. 3. learning problems, some skills with the master will be done several times, and some skills can be self-learning, books, a computer and thought on it. But some technology, the lack of systematic learning is worth the candle.
